{"title":"Abdichtung","description":null,"products":[{"product_id":"pandacoat-unibase-ms-universal-waterproofing-liquid-rubber-grey-1-kg","title":"PandaCoat UniBase MS universal waterproofing (liquid rubber), grey, 1 kg","description":"\u003ch3\u003eLeaking flat roof, gutter or cracked terrace?\u003c\/h3\u003e\u003cp\u003ePandaCoat UniBase MS is a seamless, liquid-applied waterproofing membrane (liquid rubber) that stops moisture, cracks and water damage on flat roofs, terraces, gutters and old coatings – even bitumen – without removing the old covering.\u003c\/p\u003e\u003ch3\u003eWhy UniBase MS\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFlexible, crack-resistant membrane\u003c\/strong\u003e\u003cbr\u003eCures into a flexible waterproof membrane for roofs, terraces and gutters that does not shrink or tear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersatile, usually no primer needed\u003c\/strong\u003e\u003cbr\u003eApply directly to concrete, wood, metal or tiles. On old bitumen use Primer VL 2K first to avoid blistering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWeather-resistant\u003c\/strong\u003e\u003cbr\u003eThe membrane stretches more than 3 times without tearing and resists UV, heavy rain and temperatures from -40 °C to +80 °C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot only for roofs\u003c\/strong\u003e\u003cbr\u003eWaterproofs wood, brick and masonry and works as a moisture barrier under concrete floors, in basements and other below-ground rooms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBreathable membrane\u003c\/strong\u003e\u003cbr\u003eThe isocyanate-free MS polymer lets moisture escape through the membrane instead of forming blisters. Made in the EU.\u003c\/p\u003e\u003ch3\u003eWhat it is\u003c\/h3\u003e\u003cp\u003eOne-component, liquid-applied waterproofing membrane based on MS polymer (silane-modified polymer, isocyanate-free) that cures with air humidity into a continuous, seamless coating resistant to standing water. 1 kg pack – solvent-based (SB) formula; 5.7 kg pack – solvent-free (SF), odourless, suitable for indoor use.\u003c\/p\u003e\u003ch3\u003eWhere to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlat roofs, terraces, green roofs, ponding water areas\u003c\/li\u003e\n\u003cli\u003eGutters and chimney base sealing\u003c\/li\u003e\n\u003cli\u003eRoofs with PU foam or polystyrene insulation\u003c\/li\u003e\n\u003cli\u003eConcrete, ceramic tiles, metal (no primer)\u003c\/li\u003e\n\u003cli\u003eOld bitumen coverings (with Primer VL 2K)\u003c\/li\u003e\n\u003cli\u003eOutdoor wood, foundations, walls, basements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe surface must be free of dust, grease and dirt; remove loose old coatings. Can also be applied to damp substrates. Apply 2–3 thin coats or 1 thick coat, 2–48 h between coats. Touch-dry after approx. 1.5 h (23 °C\/50%), fully cured after 12–24 h.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 1.1–1.3 L\/m² (1.5–1.8 kg\/m²).\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDensity: 1.40 g\/cm³\u003c\/li\u003e\n\u003cli\u003eShore A hardness: 50\u003c\/li\u003e\n\u003cli\u003eTensile strength: 2.20 N\/mm²\u003c\/li\u003e\n\u003cli\u003eElongation at break: 350%\u003c\/li\u003e\n\u003cli\u003eService temperature: -40 °C to +80 °C\u003c\/li\u003e\n\u003cli\u003eWater vapour permeability: 12.7 g\/m²\/day\u003c\/li\u003e\n\u003cli\u003eWatertight: 1 m water column \/ 24 h (DIN EN 1928)\u003c\/li\u003e\n\u003cli\u003eCrack bridging: class A5 (EN 1062-7)\u003c\/li\u003e\n\u003cli\u003eDoP according to EN 1504-2:2005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSafety information\u003c\/h3\u003e\u003cp\u003e1 kg pack (SB formula): ensure good ventilation during application and avoid ignition sources. Follow the safety data sheet (chemical-resistant gloves, eye and respiratory protection recommended).\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"Default Title","offer_id":67604246724998,"sku":"PDC-MS_1-1KGGR","price":18.39,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1113\/2741\/2614\/files\/01-pandacoat-unibase-ms-grey-1kg-waterproof-coating-main.jpg?v=1791747789"},{"product_id":"pandacoat-unibase-ms-universal-waterproofing-liquid-rubber-grey-5-7-kg","title":"PandaCoat UniBase MS universal waterproofing (liquid rubber), grey, 5.7 kg","description":"\u003ch3\u003eLeaking flat roof, gutter or cracked terrace?\u003c\/h3\u003e\u003cp\u003ePandaCoat UniBase MS is a seamless, liquid-applied waterproofing membrane (liquid rubber) that stops moisture, cracks and water damage on flat roofs, terraces, gutters and old coatings – even bitumen – without removing the old covering.\u003c\/p\u003e\u003ch3\u003eWhy UniBase MS\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eFlexible, crack-resistant membrane\u003c\/strong\u003e\u003cbr\u003eCures into a flexible waterproof membrane for roofs, terraces and gutters that does not shrink or tear.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVersatile, usually no primer needed\u003c\/strong\u003e\u003cbr\u003eApply directly to concrete, wood, metal or tiles. On old bitumen use Primer VL 2K first to avoid blistering.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWeather-resistant\u003c\/strong\u003e\u003cbr\u003eThe membrane stretches more than 3 times without tearing and resists UV, heavy rain and temperatures from -40 °C to +80 °C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot only for roofs\u003c\/strong\u003e\u003cbr\u003eWaterproofs wood, brick and masonry and works as a moisture barrier under concrete floors, in basements and other below-ground rooms.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBreathable membrane\u003c\/strong\u003e\u003cbr\u003eThe isocyanate-free MS polymer lets moisture escape through the membrane instead of forming blisters. Made in the EU.\u003c\/p\u003e\u003ch3\u003eWhat it is\u003c\/h3\u003e\u003cp\u003eOne-component, liquid-applied waterproofing membrane based on MS polymer (silane-modified polymer, isocyanate-free) that cures with air humidity into a continuous, seamless coating resistant to standing water. 1 kg pack – solvent-based (SB) formula; 5.7 kg pack – solvent-free (SF), odourless, suitable for indoor use.\u003c\/p\u003e\u003ch3\u003eWhere to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlat roofs, terraces, green roofs, ponding water areas\u003c\/li\u003e\n\u003cli\u003eGutters and chimney base sealing\u003c\/li\u003e\n\u003cli\u003eRoofs with PU foam or polystyrene insulation\u003c\/li\u003e\n\u003cli\u003eConcrete, ceramic tiles, metal (no primer)\u003c\/li\u003e\n\u003cli\u003eOld bitumen coverings (with Primer VL 2K)\u003c\/li\u003e\n\u003cli\u003eOutdoor wood, foundations, walls, basements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe surface must be free of dust, grease and dirt; remove loose old coatings. Can also be applied to damp substrates. Apply 2–3 thin coats or 1 thick coat, 2–48 h between coats. Touch-dry after approx. 1.5 h (23 °C\/50%), fully cured after 12–24 h.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 1.1–1.3 L\/m² (1.5–1.8 kg\/m²).\u003c\/p\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDensity: 1.40 g\/cm³\u003c\/li\u003e\n\u003cli\u003eShore A hardness: 50\u003c\/li\u003e\n\u003cli\u003eTensile strength: 2.20 N\/mm²\u003c\/li\u003e\n\u003cli\u003eElongation at break: 350%\u003c\/li\u003e\n\u003cli\u003eService temperature: -40 °C to +80 °C\u003c\/li\u003e\n\u003cli\u003eWater vapour permeability: 12.7 g\/m²\/day\u003c\/li\u003e\n\u003cli\u003eWatertight: 1 m water column \/ 24 h (DIN EN 1928)\u003c\/li\u003e\n\u003cli\u003eCrack bridging: class A5 (EN 1062-7)\u003c\/li\u003e\n\u003cli\u003eDoP according to EN 1504-2:2005\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSafety information\u003c\/h3\u003e\u003cp\u003e1 kg pack (SB formula): ensure good ventilation during application and avoid ignition sources. Follow the safety data sheet (chemical-resistant gloves, eye and respiratory protection recommended).\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"Default Title","offer_id":67604246823302,"sku":"PDC-MS_1GLGR","price":74.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1113\/2741\/2614\/files\/1_02568e1d-dc9b-4232-a281-ccb75f6d8a5a.jpg?v=1791747792"},{"product_id":"pandacoat-unibase-ms-fiber-glass-fibre-reinforced-waterproofing-grey-5-67-kg","title":"PandaCoat UniBase MS Fiber glass-fibre reinforced waterproofing, grey, 5.67 kg","description":"\u003ch3\u003eRoof, balcony or gutter joint leaking again?\u003c\/h3\u003e\u003cp\u003ePandaCoat UniBase MS Fiber is a glass-fibre reinforced, one-component liquid waterproofing membrane. Thicker and tougher than the basic UniBase MS, so it is ideal for the most demanding spots: joints, chimney flashings, gutters and other details.\u003c\/p\u003e\u003ch3\u003eWhy UniBase MS Fiber\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eReinforced with glass fibre\u003c\/strong\u003e\u003cbr\u003eGlass fibres increase the strength and crack resistance of the coating – reliable sealing even on complex shapes (joints, corners, chimney bases).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStrong layer without primer\u003c\/strong\u003e\u003cbr\u003eThicker consistency – apply with a brush or roller directly to the surface, no primer needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResistant to all weather\u003c\/strong\u003e\u003cbr\u003eThe cured membrane withstands UV, rain, standing water and temperature changes from -40 °C to +80 °C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFree of solvents and isocyanates\u003c\/strong\u003e\u003cbr\u003eOdourless, safe to use outdoors and indoors. Made in the EU.\u003c\/p\u003e\u003ch3\u003eWhat it is\u003c\/h3\u003e\u003cp\u003eOne-component liquid waterproofing based on MS polymer (silane-modified polymer), reinforced with glass fibres. Cures with atmospheric moisture into an elastic, strong, fully watertight membrane.\u003c\/p\u003e\u003ch3\u003eWhere to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlat and pitched roofs, their joints and details\u003c\/li\u003e\n\u003cli\u003eSurfaces with standing water\u003c\/li\u003e\n\u003cli\u003eGutters, chimney bases, solar panel mounting points\u003c\/li\u003e\n\u003cli\u003eRoofs with PU foam insulation\u003c\/li\u003e\n\u003cli\u003eBalconies, terraces, planters, canopies\u003c\/li\u003e\n\u003cli\u003eConcrete, wood, plastic, metal and tile surfaces\u003c\/li\u003e\n\u003cli\u003eSealing cracks and damage on existing roof coverings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDensity: 1.40 g\/cm³\u003c\/li\u003e\n\u003cli\u003eShore A hardness: 50\u003c\/li\u003e\n\u003cli\u003eTensile strength: 2.20 N\/mm²\u003c\/li\u003e\n\u003cli\u003eElongation at break: 350%\u003c\/li\u003e\n\u003cli\u003eWater vapour permeability: 12.7 g\/m²\/day\u003c\/li\u003e\n\u003cli\u003eWatertight: 1 m water column \/ 24 h (DIN EN 1928)\u003c\/li\u003e\n\u003cli\u003eAdhesion to concrete (with primer): \u0026gt;2 N\/mm²\u003c\/li\u003e\n\u003cli\u003eService temperature: -40 °C to +80 °C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eDo not apply in rainy weather. The surface must be free of dust, grease and loose particles; remove old, peeling coatings. Seal joints and cracks beforehand with UniBase MS Paste.\u003c\/p\u003e\u003cp\u003eApply UniBase MS Fiber with a brush, roller or spray equipment in 2–3 coats. In complex areas we recommend embedding a non-woven polyester fleece (60–120 g\/m²) between coats. 2–48 h between coats.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 1.5–1.8 kg\/m² (1.1–1.3 L\/m²).\u003cbr\u003e\u003cstrong\u003eCuring time:\u003c\/strong\u003e 12–24 h.\u003cbr\u003e\u003cstrong\u003eNot suitable\u003c\/strong\u003e as a directly exposed layer in swimming pools.\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"Default Title","offer_id":67604247150982,"sku":"PDC-MSF_1GLGR","price":79.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1113\/2741\/2614\/files\/01-pandacoat-unibase-ms-fiber-grau-5-67kg-hauptbild_ea14a441-2601-47e1-b105-8c6fbabae38e.jpg?v=1791747793"},{"product_id":"pandacoat-unibase-ms-clear-transparent-waterproofing-paste-1-kg","title":"PandaCoat UniBase MS Clear transparent waterproofing paste, 1 kg","description":"\u003ch3\u003eNeed to seal a crack or joint quickly and reliably?\u003c\/h3\u003e\u003cp\u003ePandaCoat UniBase MS Clear is a transparent, thick waterproofing paste based on MS polymer. It cures with atmospheric moisture into a strong, elastic, fully watertight membrane – without discolouration or visible marks.\u003c\/p\u003e\u003ch3\u003eWhy UniBase MS Clear\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eTransparent waterproofing without traces\u003c\/strong\u003e\u003cbr\u003eForms a clear, almost invisible coating – ideal for surfaces where appearance matters.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStops leaks fast\u003c\/strong\u003e\u003cbr\u003eEffectively seals cracks, joints and seams, even on wet surfaces – suitable for emergency repairs.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResistant to UV and temperature changes\u003c\/strong\u003e\u003cbr\u003eWorks outdoors and indoors – resists rain, standing water, sun, frost and heat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy to use, no primer\u003c\/strong\u003e\u003cbr\u003eApply with a trowel directly to the clean surface – no primer or special tools needed.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEnvironmentally friendly\u003c\/strong\u003e\u003cbr\u003eSolvent-free and isocyanate-free, odourless formula – safe to use indoors.\u003c\/p\u003e\u003ch3\u003eWhat it is\u003c\/h3\u003e\u003cp\u003eOne-component, thick waterproofing paste based on MS polymer that cures with atmospheric moisture into a strong, elastic, fully watertight, transparent membrane. Ready to use – free of solvents and isocyanates.\u003c\/p\u003e\u003ch3\u003eWhere to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eBathrooms, shower areas\u003c\/li\u003e\n\u003cli\u003eKitchens and other damp rooms\u003c\/li\u003e\n\u003cli\u003eWindow and door joints\u003c\/li\u003e\n\u003cli\u003eRoofs, gutters, chimney bases\u003c\/li\u003e\n\u003cli\u003eAquariums\u003c\/li\u003e\n\u003cli\u003eIndoor and outdoor repairs, emergency sealing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe surface must be free of loose particles, dust, oil etc.; remove old coatings. Apply UniBase MS Clear with a trowel in one coat.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e recommended minimum 1.5–1.8 kg\/m².\u003cbr\u003e\u003cstrong\u003eCuring time:\u003c\/strong\u003e 12–24 h depending on conditions. Cured material can only be removed mechanically.\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"Default Title","offer_id":67604247216518,"sku":"PDC-MSC_1KGTR","price":31.82,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1113\/2741\/2614\/files\/01-pandacoat-unibase-ms-clear-transparent-1kg-main-image.jpg?v=1791747796"},{"product_id":"pandacoat-topbase-st-silicone-waterproofing-coating-grey-1-kg","title":"PandaCoat TopBase ST silicone waterproofing coating, grey, 1 kg","description":"\u003ch3\u003eRoof collecting water or starting to leak?\u003c\/h3\u003e\u003cp\u003ePandaCoat TopBase ST is a one-component, silicone-based (silane) waterproofing coating for complete, standalone waterproofing of roofs and surfaces. Especially suitable for flat roofs, roofs with PU foam or polystyrene insulation and areas with standing water. Applied directly to the prepared substrate in one thick coat.\u003c\/p\u003e\u003ch3\u003eWhy TopBase ST\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eReflects solar heat (white version)\u003c\/strong\u003e\u003cbr\u003eThe white TopBase ST reflects sunlight and keeps the space under the roof cooler in summer; grey is a versatile, less visible option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne thick coat\u003c\/strong\u003e\u003cbr\u003eUnlike UniBase MS, TopBase ST does not need 2–3 coats – one thick coat is enough (up to 1.6 L\/m² in one pass).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResistant to all weather\u003c\/strong\u003e\u003cbr\u003eThe cured membrane withstands UV, rain, snow, ice and temperatures from -30 °C to +80 °C (ETAG 005 TL4\/TH3).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy to use – usually no primer\u003c\/strong\u003e\u003cbr\u003eApply with a brush, roller or airless sprayer. Primer is usually not needed on ceramics and metal; on concrete Primer VL is recommended, on damp concrete EP-W, on bitumen VL 2K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCE certified (ETAG 005)\u003c\/strong\u003e\u003cbr\u003eTopBase ST has full DoP documentation according to ETAG 005 – confirmed W3 (25-year) working life.\u003c\/p\u003e\u003ch3\u003eWhat it is\u003c\/h3\u003e\u003cp\u003eOne-component liquid waterproofing coating based on silane-modified silicone that cures with atmospheric moisture into a strong, elastic, watertight membrane. TopBase ST is a separate waterproofing line (silicone chemistry) – used instead of UniBase MS (MS polymer), not together with it in the same layer.\u003c\/p\u003e\u003ch3\u003eWhere to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlat and pitched roofs, especially with standing water\u003c\/li\u003e\n\u003cli\u003eRoofs with PU foam or polystyrene insulation\u003c\/li\u003e\n\u003cli\u003eGutters, roof details, minor damage\u003c\/li\u003e\n\u003cli\u003eFarm buildings, garages, warehouses\u003c\/li\u003e\n\u003cli\u003eOld polyurethane (PU) coatings with chalking\u003c\/li\u003e\n\u003cli\u003eConcrete, metal, ceramic, wood and plastic surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDensity: 1.24 g\/cm³\u003c\/li\u003e\n\u003cli\u003eViscosity: 2450 mPa·s (25 °C)\u003c\/li\u003e\n\u003cli\u003eShore A hardness: 50\u003c\/li\u003e\n\u003cli\u003eTensile strength: 2.20 N\/mm²\u003c\/li\u003e\n\u003cli\u003eElongation at break: 350%\u003c\/li\u003e\n\u003cli\u003eService temperature: -30 °C to +80 °C (ETAG 005: TL4\/TH3)\u003c\/li\u003e\n\u003cli\u003eFire class (EN 13501-1): E\u003c\/li\u003e\n\u003cli\u003eWorking life (ETAG 005): W3 (25 years)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe substrate must be clean, dry and free of dust and grease (concrete moisture \u0026lt;5%). Primer is usually not needed, but for better mechanical properties we recommend Primer VL (concrete), EP-W (damp concrete) or VL 2K (bitumen). Seal joints beforehand with TopBase ST Paste.\u003c\/p\u003e\u003cp\u003eApply TopBase ST with a brush, roller or spray equipment in one thick coat. If more than one coat is applied, wait 3–48 h between coats. Skin forms in approx. 2 h (23 °C\/50% RH).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 1.0–1.3 L\/m² (1.2–1.6 kg\/m²) for a standard coat, or up to 1.6 L\/m² in one thick coat.\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"Default Title","offer_id":67604247413126,"sku":"PDC-ST_1KGGR","price":16.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1113\/2741\/2614\/files\/01-pandacoat-topbase-st-grey-1kg-main-image.jpg?v=1791747797"},{"product_id":"pandacoat-topbase-st-silicone-waterproofing-coating-grey-4-7-kg","title":"PandaCoat TopBase ST silicone waterproofing coating, grey, 4.7 kg","description":"\u003ch3\u003eRoof collecting water or starting to leak?\u003c\/h3\u003e\u003cp\u003ePandaCoat TopBase ST is a one-component, silicone-based (silane) waterproofing coating for complete, standalone waterproofing of roofs and surfaces. Especially suitable for flat roofs, roofs with PU foam or polystyrene insulation and areas with standing water. Applied directly to the prepared substrate in one thick coat.\u003c\/p\u003e\u003ch3\u003eWhy TopBase ST\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eReflects solar heat (white version)\u003c\/strong\u003e\u003cbr\u003eThe white TopBase ST reflects sunlight and keeps the space under the roof cooler in summer; grey is a versatile, less visible option.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne thick coat\u003c\/strong\u003e\u003cbr\u003eUnlike UniBase MS, TopBase ST does not need 2–3 coats – one thick coat is enough (up to 1.6 L\/m² in one pass).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResistant to all weather\u003c\/strong\u003e\u003cbr\u003eThe cured membrane withstands UV, rain, snow, ice and temperatures from -30 °C to +80 °C (ETAG 005 TL4\/TH3).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy to use – usually no primer\u003c\/strong\u003e\u003cbr\u003eApply with a brush, roller or airless sprayer. Primer is usually not needed on ceramics and metal; on concrete Primer VL is recommended, on damp concrete EP-W, on bitumen VL 2K.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCE certified (ETAG 005)\u003c\/strong\u003e\u003cbr\u003eTopBase ST has full DoP documentation according to ETAG 005 – confirmed W3 (25-year) working life.\u003c\/p\u003e\u003ch3\u003eWhat it is\u003c\/h3\u003e\u003cp\u003eOne-component liquid waterproofing coating based on silane-modified silicone that cures with atmospheric moisture into a strong, elastic, watertight membrane. TopBase ST is a separate waterproofing line (silicone chemistry) – used instead of UniBase MS (MS polymer), not together with it in the same layer.\u003c\/p\u003e\u003ch3\u003eWhere to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eFlat and pitched roofs, especially with standing water\u003c\/li\u003e\n\u003cli\u003eRoofs with PU foam or polystyrene insulation\u003c\/li\u003e\n\u003cli\u003eGutters, roof details, minor damage\u003c\/li\u003e\n\u003cli\u003eFarm buildings, garages, warehouses\u003c\/li\u003e\n\u003cli\u003eOld polyurethane (PU) coatings with chalking\u003c\/li\u003e\n\u003cli\u003eConcrete, metal, ceramic, wood and plastic surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eDensity: 1.24 g\/cm³\u003c\/li\u003e\n\u003cli\u003eViscosity: 2450 mPa·s (25 °C)\u003c\/li\u003e\n\u003cli\u003eShore A hardness: 50\u003c\/li\u003e\n\u003cli\u003eTensile strength: 2.20 N\/mm²\u003c\/li\u003e\n\u003cli\u003eElongation at break: 350%\u003c\/li\u003e\n\u003cli\u003eService temperature: -30 °C to +80 °C (ETAG 005: TL4\/TH3)\u003c\/li\u003e\n\u003cli\u003eFire class (EN 13501-1): E\u003c\/li\u003e\n\u003cli\u003eWorking life (ETAG 005): W3 (25 years)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe substrate must be clean, dry and free of dust and grease (concrete moisture \u0026lt;5%). Primer is usually not needed, but for better mechanical properties we recommend Primer VL (concrete), EP-W (damp concrete) or VL 2K (bitumen). Seal joints beforehand with TopBase ST Paste.\u003c\/p\u003e\u003cp\u003eApply TopBase ST with a brush, roller or spray equipment in one thick coat. If more than one coat is applied, wait 3–48 h between coats. Skin forms in approx. 2 h (23 °C\/50% RH).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e 1.0–1.3 L\/m² (1.2–1.6 kg\/m²) for a standard coat, or up to 1.6 L\/m² in one thick coat.\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"Default Title","offer_id":67604247511430,"sku":"PDC-ST_1GLGR","price":56.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1113\/2741\/2614\/files\/01-pandacoat-topbase-st-grey-4.7kg-main-image.jpg?v=1791747798"},{"product_id":"pandacoat-topbase-st-fiber-glass-fibre-reinforced-silicone-waterproofing-grey-1-kg","title":"PandaCoat TopBase ST Fiber glass-fibre reinforced silicone waterproofing, grey, 1 kg","description":"\u003ch3\u003eChimney, joint or detail leaking again, and a thinner coating would run off?\u003c\/h3\u003e\u003cp\u003ePandaCoat TopBase ST Fiber is the glass-fibre reinforced version of TopBase ST for vertical surfaces and details: chimneys, gutters, joints and sloped areas. The glass fibre thickens the silicone to a non-sag, paste-like consistency, so the coating stays on vertical surfaces and does not slide down.\u003c\/p\u003e\u003ch3\u003eWhy TopBase ST Fiber\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNon-sag consistency for verticals and details\u003c\/strong\u003e\u003cbr\u003eGlass fibre thickens the silicone – the coating stays on chimneys, upstands and joints without running, even when applied vertically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBetter crack bridging\u003c\/strong\u003e\u003cbr\u003eThe thicker consistency reliably seals small details and cracks where a thinner coating would be too weak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResistant to all weather\u003c\/strong\u003e\u003cbr\u003eThe cured membrane withstands UV, rain, snow and temperatures from -30 °C to +80 °C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy to use – usually no primer\u003c\/strong\u003e\u003cbr\u003eApply with a brush or roller in 2–3 thin coats. Primer is usually not needed on ceramics and metal; on concrete Primer VL is recommended, on bitumen Primer VL 2K.\u003c\/p\u003e\u003ch3\u003eWhat it is\u003c\/h3\u003e\u003cp\u003eOne-component, glass-fibre reinforced silicone coating – the same TopBase ST chemistry (silane-based), only thicker and non-sag. Cures with atmospheric moisture into a strong, elastic, watertight membrane. Used as a complement to TopBase ST for details or on its own for smaller\/vertical areas.\u003c\/p\u003e\u003ch3\u003eWhere to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChimneys, gutters, roof joints and upstands\u003c\/li\u003e\n\u003cli\u003eSloped and vertical surfaces where a thinner coating would run off\u003c\/li\u003e\n\u003cli\u003eSmall cracks and damaged spots\u003c\/li\u003e\n\u003cli\u003eCamper and trailer roofs, farm buildings, terraces\u003c\/li\u003e\n\u003cli\u003eConcrete, metal, ceramic, wood and glass surfaces\u003c\/li\u003e\n\u003cli\u003eExtra reinforcement of flat roof details together with TopBase ST\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRelative density: 1.265 g\/cm³\u003c\/li\u003e\n\u003cli\u003eDynamic viscosity: 1800–2200 cP\u003c\/li\u003e\n\u003cli\u003eFlash point: 67 °C\u003c\/li\u003e\n\u003cli\u003eService temperature: -30 °C to +80 °C\u003c\/li\u003e\n\u003cli\u003eCLP 1272\/2008 classification: not hazardous (supplementary statements EUH066, EUH208)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe substrate must be clean, dry and free of dust and grease (concrete moisture \u0026lt;5%). Primer is usually not needed on ceramics and metal; on concrete Primer VL is recommended, on bitumen Primer VL 2K. Reinforce joints beforehand with TopBase ST Paste.\u003c\/p\u003e\u003cp\u003eApply TopBase ST Fiber with a brush or roller in 2–3 thin coats, 3–48 h between coats depending on conditions. Skin forms in approx. 2 h.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e this is the TopBase ST version for details and verticals – use it alone for small areas or together with standard TopBase ST, not as a replacement for a whole roof.\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"Default Title","offer_id":67604247773574,"sku":"PDC-STF_1KGGR","price":18.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1113\/2741\/2614\/files\/01-pandacoat-topbase-st-fiber-grey-1kg-main-image.jpg?v=1791747803"},{"product_id":"pandacoat-topbase-st-fiber-glass-fibre-reinforced-silicone-waterproofing-white-1-kg","title":"PandaCoat TopBase ST Fiber glass-fibre reinforced silicone waterproofing, white, 1 kg","description":"\u003ch3\u003eChimney, joint or detail leaking again, and a thinner coating would run off?\u003c\/h3\u003e\u003cp\u003ePandaCoat TopBase ST Fiber is the glass-fibre reinforced version of TopBase ST for vertical surfaces and details: chimneys, gutters, joints and sloped areas. The glass fibre thickens the silicone to a non-sag, paste-like consistency, so the coating stays on vertical surfaces and does not slide down.\u003c\/p\u003e\u003ch3\u003eWhy TopBase ST Fiber\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eNon-sag consistency for verticals and details\u003c\/strong\u003e\u003cbr\u003eGlass fibre thickens the silicone – the coating stays on chimneys, upstands and joints without running, even when applied vertically.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBetter crack bridging\u003c\/strong\u003e\u003cbr\u003eThe thicker consistency reliably seals small details and cracks where a thinner coating would be too weak.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResistant to all weather\u003c\/strong\u003e\u003cbr\u003eThe cured membrane withstands UV, rain, snow and temperatures from -30 °C to +80 °C.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eEasy to use – usually no primer\u003c\/strong\u003e\u003cbr\u003eApply with a brush or roller in 2–3 thin coats. Primer is usually not needed on ceramics and metal; on concrete Primer VL is recommended, on bitumen Primer VL 2K.\u003c\/p\u003e\u003ch3\u003eWhat it is\u003c\/h3\u003e\u003cp\u003eOne-component, glass-fibre reinforced silicone coating – the same TopBase ST chemistry (silane-based), only thicker and non-sag. Cures with atmospheric moisture into a strong, elastic, watertight membrane. Used as a complement to TopBase ST for details or on its own for smaller\/vertical areas.\u003c\/p\u003e\u003ch3\u003eWhere to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eChimneys, gutters, roof joints and upstands\u003c\/li\u003e\n\u003cli\u003eSloped and vertical surfaces where a thinner coating would run off\u003c\/li\u003e\n\u003cli\u003eSmall cracks and damaged spots\u003c\/li\u003e\n\u003cli\u003eCamper and trailer roofs, farm buildings, terraces\u003c\/li\u003e\n\u003cli\u003eConcrete, metal, ceramic, wood and glass surfaces\u003c\/li\u003e\n\u003cli\u003eExtra reinforcement of flat roof details together with TopBase ST\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRelative density: 1.265 g\/cm³\u003c\/li\u003e\n\u003cli\u003eDynamic viscosity: 1800–2200 cP\u003c\/li\u003e\n\u003cli\u003eFlash point: 67 °C\u003c\/li\u003e\n\u003cli\u003eService temperature: -30 °C to +80 °C\u003c\/li\u003e\n\u003cli\u003eCLP 1272\/2008 classification: not hazardous (supplementary statements EUH066, EUH208)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eThe substrate must be clean, dry and free of dust and grease (concrete moisture \u0026lt;5%). Primer is usually not needed on ceramics and metal; on concrete Primer VL is recommended, on bitumen Primer VL 2K. Reinforce joints beforehand with TopBase ST Paste.\u003c\/p\u003e\u003cp\u003eApply TopBase ST Fiber with a brush or roller in 2–3 thin coats, 3–48 h between coats depending on conditions. Skin forms in approx. 2 h.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e this is the TopBase ST version for details and verticals – use it alone for small areas or together with standard TopBase ST, not as a replacement for a whole roof.\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"Default Title","offer_id":67604247970182,"sku":"PDC-STF_1KGWT","price":18.89,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1113\/2741\/2614\/files\/01-pandacoat-topbase-st-fiber-silikon-weiss-1kg-hauptbild_f1582b51-65cb-44c0-a59b-d01df2f78149.jpg?v=1791747806"},{"product_id":"pandacoat-topbase-st-paste-fiber-silicone-sealing-paste-grey-1-kg","title":"PandaCoat TopBase ST Paste Fiber silicone sealing paste, grey, 1 kg","description":"\u003ch3\u003eGutter leaking, crack or joint letting water in?\u003c\/h3\u003e\u003cp\u003ePandaCoat TopBase ST Paste is a thick, non-sag silicone paste for sealing joints, cracks and connections. Used as an add-on before or after the TopBase ST \/ TopBase ST Fiber coat, or on its own for spot repairs of gutters, chimneys and joints.\u003c\/p\u003e\u003ch3\u003eWhy TopBase ST Paste\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eA thick paste, not a liquid\u003c\/strong\u003e\u003cbr\u003eIdeal for vertical cracks, chimney joints and gutter seams where a thinner coating would run – apply with a trowel or brush straight into the gap.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eOne coat, no primer\u003c\/strong\u003e\u003cbr\u003eUsually no primer needed – clean the surface and apply straight from the tin in one coat with a trowel, avoiding rainy days.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eResistant to all weather\u003c\/strong\u003e\u003cbr\u003eOnce cured, like the TopBase ST coating, it withstands UV, rain, snow and temperature changes.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFor spot repairs or preparation\u003c\/strong\u003e\u003cbr\u003eSeal a cracked gutter seam in minutes, or reinforce joints and corners before coating the whole roof with TopBase ST.\u003c\/p\u003e\u003ch3\u003eWhat it is\u003c\/h3\u003e\u003cp\u003eOne-component, silicone-based sealing paste – the same TopBase ST chemistry in paste form. Cures with atmospheric moisture into a strong, elastic, watertight sealant. It is not a standalone roof coating – it is an add-on to the TopBase ST \/ ST Fiber system or a spot sealant.\u003c\/p\u003e\u003ch3\u003eWhere to use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGutter seams and joints, chimney flashings\u003c\/li\u003e\n\u003cli\u003eVertical cracks where a thinner coating would run\u003c\/li\u003e\n\u003cli\u003eSkylight edges, roof joints, corrugated sheets\u003c\/li\u003e\n\u003cli\u003eCamper, trailer, farm building and garage roofs\u003c\/li\u003e\n\u003cli\u003eBitumen roof seams, before or after a TopBase ST coat\u003c\/li\u003e\n\u003cli\u003eConcrete, metal, ceramic and wood surfaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical data\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eRelative density: 1.25\u003c\/li\u003e\n\u003cli\u003eDynamic viscosity: 6500 cP (thicker than TopBase ST Fiber)\u003c\/li\u003e\n\u003cli\u003eFlash point \u0026gt;60 °C\u003c\/li\u003e\n\u003cli\u003ePractically solvent-free (VOC 1.33% by weight)\u003c\/li\u003e\n\u003cli\u003eCLP 1272\/2008 classification: not hazardous (supplementary statement EUH208 only)\u003c\/li\u003e\n\u003cli\u003eSkin forms in approx. 2 h\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication\u003c\/h3\u003e\u003cp\u003eClean the surface of dirt, dust and grease. Apply the paste with a trowel or brush straight from the tin, pressing it into the crack, seam or joint, and smooth it. Avoid application on rainy days. Apply in one coat; for extra protection, cover with a TopBase ST coat once the paste has set.\u003c\/p\u003e","brand":"PandaCoat","offers":[{"title":"Default Title","offer_id":67604248134022,"sku":"PDC-STPSF_1KGGR","price":19.86,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1113\/2741\/2614\/files\/01-pandacoat-topbase-st-paste-fiber-grey-1kg-main-image_a29c73cb-fa7a-4934-b873-9019da3d9195.jpg?v=1791747808"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1113\/2741\/2614\/collections\/01-pandacoat-unibase-ms-grey-1kg-waterproof-coating-main.jpg?v=1791749945","url":"https:\/\/riven24.com\/de\/collections\/abdichtung.oembed","provider":"Riven24","version":"1.0","type":"link"}